Department Achievements

• Mr. Vinod Kumar Verma Awarded by MHRD Minister (State) Dr. Satya Pal Singh at AICTE, for acheiving 2nd Prize at 1st Vishwakarma Award at New Delhi


• Dr. Devendra Choudhary Won Highly Cited Research Award in JPSM by Elsevier, 2016


• First time in the history of GECA, two students of Final year Mechanical Engineering Prateek Verma and Sanjay Rathore has co-authored the paper titled "Performance Investigation of Triangular Solar Air Heater Duct having Broken Inclined Roughness using Computational Fluid Dynamics" in esteemed journal, ASME.


• Organised a National Workshop on "Research Projects, Funding and Opportunities in Engineering and Sciences" from May 29-30, 2019


• Organised one week STC on "Renewable Energy Systems and Their Techno-Economic Feasibility in India" from July 8-12, 2019


• Organized One Week Short Term Course on Entrepreneurship and Personality Development from 4th – 8th November 2019


• Strength of the department: • Highly qualified and senior faculties • Most of the Faculties have acquired their PhD/M.Tech. from the institutes of national importance such as IITs/NITs • Oldest Branch of this College and almost 100% admissions through JEE and LEEP • Good Academic records • Substantial research aptitude and outcome • Good placements (on/off campus) • Alumni are working in reputed organizations • SAE India Club of GECA gives opportunity to the students to learn with practical applications.

Department Achievements

• Mr. Vinod Kumar Verma Awarded by MHRD Minister (State) Dr. Satya Pal Singh at AICTE, for acheiving 2nd Prize at 1st Vishwakarma Award at New Delhi


• Dr. Devendra Choudhary Won Highly Cited Research Award in JPSM by Elsevier, 2016

Labs

Dynamics of Machine Lab

Room:-Workshop (WS-7/8)
Lab Incharge:-Dr. Chandan Sharma
Lab Technician:-Mr. Gajanand Meena
Lab Attendent:-

Details

×

Objective:

DOM lab is to analyze the behavior of a given machine or mechanism when subjected to dynamic forces. Further the lab equipment’s will help to clear the fundamentals of dynamic force balance, transmissibility of forces, isolation of systems, vibrations, instrumentation and standards.

List Of Experiments:

1. To verify the torque relation for gyroscope.
2. To plot force vs. radius and lift vs. speed curves for governors.
3. To plot pressure distribution curves on a journal bearing.
4. To perform wheel balancing.
5. To perform static and dynamic balancing on balancing set up.
6. To determine mass moment of inertia of a flywheel.
7. Study of a lathe gear box.
8. Study of a sliding mesh automobile gear box.
9. Study of a planetary gear box.

  Outcome of Lab:

1. Students will be able to understand the working of different gear boxes
2. Students will be able to analyze curves of different centrifugal governors
3. Students will be able to perform static and dynamic balancing of rotating parts
4. Students will be able to understand the working of Gyroscope and verify the torque relation.

Material Science and Testing Lab

Room:-Workshop (WS-5/6)
Lab Incharge:-Dr. Alok Khatri
Lab Technician:-Mr. Govind Sharma
Lab Attendent:-

Details

×

                 Material Testing Laboratory

Material Science testing Laboratory is a back bone of Mechanical Engineering branch. The main focus area of testing is Destructive Testing. Different Testing are conducted to measure the stresses in Tension, Compression, Shearing, Impact etc. The changes of microstructure and measurement of mechanical properties is performed by microstructure examination and heat treatment of specimen. 

Objectives of the Laboratory:

Identification of engineering materials, examining their microstructure, properties, destructive testing of materials and different heat treatment processes.

Experiments:

1. Experiment on identification of engineering materials and their classification.

2.  Specimen preparation for microscopic examination.
3.  Microstructure examination of different given specimens.
4. Heat treatment experiment for annealing, normalizing, quenching purpose.
5. Experiment on Impact, fatigue, creep testing machines.

Outcomes of the Laboratory:

1. Student will be able to identify different materials, their crystal and microstructures and perform different heat treatment processes
2. Student will be able to determine Tensile, Compressive ,Shearing, Bending, Impact, Fatigue, Creep Strength and Hardness of materials

Computer Aided Manufacturing (CAM) Lab

Room:-Workshop (WS-3/4)
Lab Incharge:-Mr. Tarun Kumar Aseri
Lab Technician:-Mr. Rajesh Kumawat
Lab Attendent:-

Details

×

Computer Aided Manufacturing Laboratory 

Outcomes of the Laboratory:

1. Learn the basics of the Computer Numerical Control (CNC) Machines.
2. Apply knowledge of computer aided process planning, feature and group technology, and inventory control in manufacturing processes.  
3. Apply the concepts/components of computer integrated manufacturing and integrate them in a coordinated fashion.
4. To understand the role of Computer Aided Production Management Systems.

5. MasterCAM Educational Suit 2020 simulation software with 10 users

6. Availability of two server/workstation for high computation simulation (Xeon - 24C/48T, 96GB RAM)

Heat and Mass Transfer Lab

Room:-Workshop (WS-1/2)
Lab Incharge:-Dr. Rohit Misra
Lab Technician:-Mr. Subhash Saini
Lab Attendent:-

Details

×

Vibration Engineering Lab

Room:-Workshop (WS-7/8)
Lab Incharge:-Dr. Alok Khatri
Lab Technician:-Mr. Govind Sharma
Lab Attendent:-

Details

×

Industrial Engineering Lab

Room:-NB-226
Lab Incharge:-Dr. Devendra Choudhary
Lab Technician:-Mr. Subhash Saini
Lab Attendent:-

Details

×

Industrial Engineering laboratory

Industrial engineering (IE) is a branch of engineering which deals with the optimization of complex processes, systems or organizations by eliminating waste of time, money, materials, man-hours, machine time, energy and other resources that do not generate value. In previous century, focus of IE was to carry out work and method study using a stop watch. However, nowadays, its focus is to figure out non-value added processes/activities in the existing system and to design the improved, more productive and leaner systems.

Course Objective:

To understand and apply on-line and off-line quality control techniques to assure desired quality.

Course Outcomes:

 At the end of the course, the student will be able to:

1. Design variable control charts for the given quality characteristic using Excel and evaluate the impact of shift in process mean and change in process variability on the state of statistical quality control and process capability.

2. Design attribute control charts for the given quality characteristic using Excel and evaluate the impact of change in fraction defective or number of defects on the state of statistical quality control.

3. Create an appropriate Single Sampling Plan (SSP) with the help of OC curve for given sampling attributes.

Production Engineering Lab

Room:-Workshop (WS-9/10)
Lab Incharge:-Mr. Yogesh K Gupta
Lab Technician:-Mr. Devishankar
Lab Attendent:-

Details

×

About Lab

Course Objective

List of Experiments

Fluid Mechanics Lab

Room:-FM Lab
Lab Incharge:-Dr. Vikas Bansal
Lab Technician:-Mr. Govind Sharma
Lab Attendent:-

Details

×

Computer Aided Design (CAD) Lab

Room:-CAD Lab
Lab Incharge:-Kamal Singh
Lab Technician:-Rajesh Kumawat
Lab Attendent:-

Details

×

Computer Aided Drafting and Design Laboratory 

Objectives of the Laboratory:

1. To learn software like AutoCAD, Invertor/ Pro E/ Uni-graphics and to produce basic concepts to make 2D drafting.
2. To apply basic concept to drawing, edit, dimension, hatching etc. to develop 2D & 3D Modelling.
3. To make 3D modelling, Assembling, modification & manipulation along with detailing.
4. To prepare surface modelling and sheet metal  operations through various exercise.

Experiments:

1.  Introduction and different feature of the CAD software

2.  2-D Drafting.

3. 3-D Advanced Modelling

4. 3-D Advanced Modelling.

5.  Assembly Modeling

6. Feature Modification and Manipulation.

7. Detailing.

8. Sheet metal operations.

Outcomes of the Laboratory:

1. Able to use software like AutoCAD, Invertor/ Pro E/ Uni-graphics.
2. Learned basic concept to drawing, edit, dimension, hatching etc. to develop 2D & 3D Modelling.
3. Able to make 3D modelling, Assembling, modification & manipulation along with detailing.
4. Able to prepare surface modelling and sheet metal  operations through various exercises.

Thermal Engineering Lab

Room:-Thermal Lab
Lab Incharge:-D.K. Jamuwa
Lab Technician:-Subhas Saini
Lab Attendent:-

Details

×

Thermal Engineering Laboratory 

Objectives of the Laboratory: 

The objective of the thermal engineering laboratory is to introduce the student the fundamental theories and the industrial applications of thermodynamics, heat transfer, and fluid mechanics. This laboratory supports the courses for the undergraduate and graduate studies. Moreover, this laboratory also supports the advanced research in the area of thermal engineering, heat transfer, and fluid mechanics.

Proposed Experiments:

1. Study of working of four stroke petrol engine and four stroke diesel engine with the help of cut section models.
2. Study of working of two stroke petrol and two stroke diesel engine with the help of cut section models.
3. To draw valve timing diagram for a single cylinder diesel engine.
4. Study of various types of boilers.
5. Study of fuel supply system of a petrol engine (fuel pump and simple carburetor).
6. To perform constant speed load test on a single cylinder diesel engine and to plot performance curves: indicated thermal efficiency, 
     brake thermal efficiency, mechanical efficiency Vs. Brake power, and heat balance sheet.
7. Determination of dryness fraction of steam.
8. Performance characteristics of Francis turbine.

Outcomes of the Laboratory:

1. Analyze  the basic functions of  internal combustion engines
2. Define the tonnage capacity in refrigeration & air conditioning.
3. Understand basics of turbines & pumps.
4. Understand about steam & steam power plants.